Server Configuration Generation I

From ATLASWARES

This information is related to an older server model. Click here to view the current model.

Contents 1 Generating a new SSH Key for use with NX 2 Installing the Linhash Service 3 Linhash Service Initial Setup 4 Configuring a D-Link Print Server 4.1 Connect the print server 4.2 Configure the print server names 4.3 Configure the print server networking 4.4 Addressing Printers over TCP/IP

Generating a new SSH Key for use with NX

• Login as root
• Open a new console session
• Execute the following command:

 /usr/NX/scripts/setup/nxserver --keygen

• This will produce the following output:

 NX> 718 Cannot stop NX statistics:
 NX> 709 NX statistics are disabled for this server.
 NX> 704 Starting: server-keygen operation at: Tue Aug 15 16:52:35 2006.
 NX> 704 Generating new ssh-keys. This can take a while.
 NX> 704 Keys generated correctly. Backuping files.
 NX> 704 Keys backuped correctly. Updating files.
 NX> 704 Keys updated..
 NX> 723 Cannot start NX statistics:
 NX> 709 NX statistics are disabled for this server.
 NX> 704 The NX clients should now use the key:.
 NX> 704 /usr/NX/share/keys/default.id_dsa.key to get connected to this NX server.

• Insert USB drive
• Open two Konqueror windows
• Drag the 3 files in /usr/NX/share/keys/ to the corresponding customer's folder in Licenses & Keys on the USB drive

Installing the Linhash Service

• At a Konsole, type service lh3srvc stop or service lh3lite stop
• Open a Konqueror window to the USB drive, media:/sdc1/Licenses & Keys/(account)/lh3srvcd 3.0.0.2 ...
• Open a Konqueror window to /usr/sbin/
• drag the account's stamped lh3srvcd or lh3lited engine to /usr/sbin/
• close the Konqueror windows, and type service lh3srvc start or service lh3lite start

Linhash Service Initial Setup

• Select System + Services from the F menu
• Click on a service to manage, UD3 or UD3lite
• From the Actions menu, choose: Add, Delete, Start, Stop, or Restart the selected service
• Choose File + Save Changes from the menu when finished

Configuring a D-Link Print Server

Connect the print server

1. Plug the print server in and connect it to the LAN
2. From a Windows(tm) workstation on the LAN, choose START + My Network Places
3. Click on Show icons for networked UPnP devices under Network Tasks
4. Double-Click on the print server icon when it appears

Configure the print server names

1. Click the Configuration tab on the D-Link browser page
2. Click the System button on the Configuration tab page
3. Set the Print Server name (_________________________) (default to WARESprinter)
4. Set LPT1 port name to LPT1
5. Set LPT2 port name to LPT2
6. Set USB port name to USB
7. Click Apply at the bottom of the page

Configure the print server networking

1. Click the Configuration tab on the D-Link page
2. Click the Network button the the Configuration tab page
3. At IP Address, click Manually Assign
4. Set the IP Address: _____._____._____._____ (default to 192.168.2.253)
5. Set the Gateway Address: _____._____._____._____ (default to 192.168.2.1)
6. Set the DNS-1 Address: _____._____._____._____ (default to 192.168.2.1)
7. Enter the WorkGroup name (____________________) (default to ATLASWARES)
8. If using remote printing, enter IPP information (IPP:nnn.nnn.nnn.nnn:910x/LPTn)
9. Click Apply at the bottom of the page

Addressing Printers over TCP/IP

(The following methods of addressing printers in a TCP/IP environment are not supported by Windows for Workgroups.)

• by server name: ipp://WaresServer:631/printers/PagePrinter
• internet printing protocol: ipp://192.168.2.253:9100